|

ThermoWorks Smoke X (X2 and X4) Review

smokex orange Smoke20X4 gen01

Smoking-Meat.com is supported by its readers. We may earn an affiliate commission at no extra cost to you if you buy through a link on this page.

Read this article without ads

If you haven't heard of the new wireless thermometer from ThermoWorks called the Smoke X– you will! This is the original Smoke on steroids and to say I'm impressed is an understatement!

I was able to get my hands on one of these pre-launch and from the moment I pulled it out of the box, I knew it was going to be a big deal in the barbecue world!

I've been using the Smoke from Thermoworks for a number of years now and it's just one of those smoking/grilling tools that I don't like being without. It has great range, a dedicated receiver (in other words, I don't need my phone or an app to use it), not to mention it's tough, has large enough digits that I don't need my glasses to read it and it's easy to operate. All of the things that make me fall in love with it again and again, every single time I use it.

ThermoWorks has created several newer thermometers such as the Signals but I've just sort of gotten attached to the Smoke and couldn't move on to the “better thing”.

Well, in walks the Smoke X and it's everything great about the original Smoke thermometer plus some and I have to say, I may have found a new meat smoking partner!

If you're already know you want one.. you can get it HERE now!

For the rest of you, let's just step back and talk about all of the features of this new Smoke X one by one:

The Packaging

You may think this is not important, but you would be wrong.

How a product is packaged to make sure it arrives to you safe and sound is an attention to details that says a lot about the company making the product. If they claim it's a superior product but skimp on the packaging, how great of a product is it really?

This thermometer came packaged in a tray that had a spot for everything. And all of those cutouts are made so the item is held securely and did not move.

Even though it was held securely, I did not have to fight with anything to get it out of the package and into use.

The packaging was well though out and that mattered to me as a consumer.

The Main Unit

The main part of this thermometer is the part that stays at the smoker. It has 6 buttons on the front, 4 buttons on the back, a large screen with large, easy-to-read digits, a kickstand to help it stand up, inset magnets for mounting it to a metal object, 4 inputs for probes*, an input for a fan controller and of course the battery compartment.

*The X4 has 4 inputs and comes with 1 air probe and 3 meat probes, the X2 has 2 inputs and comes with 1 air probe and 1 meat probe.

This part of the unit, like the receiver is molded in color heavy duty plastic that has a great texture to it. It looks tough, feels solid and looks aesthetically pleasing.

IMG 0399
The 6 Buttons (left to right)
  1. Ch (channel) button – This is simply used to select a channel so you can make adjustments to the high/low alarms or turn off the alarm for that channel.
  2. Set button – Once a channel is selected, this button cycles between low alarm, high alarm and alarm off so you can make any necessary adjustments.
  3. Up button – adjusts the selected setting in a forward or up direction.
  4. Down button – adjusts the selected setting in a backward or down direction.
  5. Light button – Turns on the backlight for 20 seconds.
  6. Vol (volume) button – Cycles through the 4 alarm volumes from loud to soft and then off.
IMG 0399 buttons
The 4 Buttons on the back (left to right)
  1. On/Off
  2. °C/°F – Select to see temperature readings in Celsius or Fahrenheit.
  3. Cal – Allows you to calibrate the thermometer if needed.
  4. Sync – Sync new or extra receivers to the sending (main) unit.
IMG 0404 rear buttons
The Large Screen

The screen is divided up into sections, one for each channel/probe. At the far right in very large digits is the temperature and just to the right of that is the high alarm setting at top and low alarm setting at bottom. Further to the right is the max temperature at top and min temperature at bottom.

This maximum and minimum temperatures are very handy as it tells you the highest and lowest temperature that have been achieved for that particular cook. It resets each time you turn the thermometer off and back on.

As mentioned previously, the screen has a backlight that can be activated for 20 seconds by hitting the light button at the bottom.

IMG 0399 screen
Kickstand

The kickstand on the back can be pulled out to give you a stand for holding the main part of the thermometer at about a 30° angle.

IMG 0415
Magnets

Two magnets are inset on the back of the main unit so you can attach it to another smoker or other piece of metal.

Probe Inputs

The  Smoke X4 (the version I received) is a 4-channel meat thermometer. It ships with one ambient probe and three meat probes. I typically stick with channel 1 for the ambient temperature and use the other channels for meat probes but you can mix this up however you like.

USB-C Input

Just below the probe inputs, is a usb-c input. This is designed to allow the main unit to be powered with an available power adapter. The USB-C input is also where you would connect the Billows fan controller if you want to use the Smoke X to control the temperature in your charcoal smoker in addition to monitoring the temperature. You can learn more about the Billow fan controller HERE

IMG 0403
The probes

The probes are ThermoWorks pro series probes with 47-inch cables with a temperature range of -58 to 572°F (-50 to 300°C). The cables are able to withstand temperature up to 700°F (370°C).

IMG 0365
IMG 0364
Grate Clip

The ambient probe is made to pass through the two holes in the grate clip. The grate clip can be attached to the grate of your smoker or grill. You may need to bend it in in or out carefully to make it fit properly on your particular grate.

IMG 0363
Colored Silicon Rings

This product ships with (8) silicon rings– four colors, two of each color. The rings are placed on the probe end and on the plug end of the probes to color-code them and help keep things straight. When you have multiple probes running every which way, color coding will help you to know what probe goes to which piece of meat.

IMG 0361
The Receiver

This is the part of the unit that you carry with you wherever you are whether that's next to your favorite chair, by the pool, on the bedside table or around your neck using the included lanyard.

Like the main unit, it's screen is divided into sections and shows you the temperature as well as the alarm on or off setting and the high/low alarm settings.

The receiver has 2 button on the front, 2 inset magnets on the back and a battery compartment.

I complained about the rounded bottom on the original Smoke receiver and I was so happy to see that the new Smoke X receiver has a flat bottom side on the receiver so it can easily sit on the table.. no special holder needed.

IMG 0400
Buttons
  1. Light/Power button – Turns the light on for 20 seconds. Also works the same as the on/off button on the main unit– press once to turn the receiver on or hold it for 3 seconds to turn the receiver off.
  2. Vol (volume) – Cycles through the 4 alarm volumes from loud to soft and then off.
IMG 0400 recvr buttons
Lanyard

The lanyard attaches to the hole in the bottom of the receiver and is designed to allow the unit to hang around your neck for each access while you are doing other things.

Battery Compartment

Both the main unit and the receiver have a battery compartment accessible with a single phillips head screw. Once the cover is removed, there are (2) AA batteries that power each unit.

The batteries are designed to last about 330 hours (wow!) under normal use.

IMG 0408
Transmission Range

One thing that I think is going to be very handy is the extended transmission range.. the original Smoke had a range of about 300 feet (plenty for me most of the time) but the new Smoke X has a line-of-sight range of 1.24 miles!

Because this is line-of-sight, it doesn't necessarily mean you can run to the grocery store up the street but because it has this much range, but you can be assured that it will reach all parts of your house and then some.

I decided to give this a try in my own neighborhood and I was able to get about 2 blocks away with 6 houses or more between us before it cut out.

Sync Multiple Receivers

And in case you weren't aware, you can sync multiple receivers to a single main unit.. another great feature for barbecue competitors. Everyone on your team can know what is going on at the smoker, at all times.

My overall opinion of the Smoke X meat thermometer

There are plenty of thermometers available that I don't rave about.. they're just not all that amazing. When I rave about one, it's because it's worthy of raving and one that I think all of you are going to love using.

As I said early on, I love the original Smoke thermometer and the X is everything great about the original Smoke plus a lot more.

=>Here's a comparison chart between the original Smoke and the new Smoke X

I love having a dedicated receiver instead of having to connect to an app on my phone via bluetooth or Wi-Fi. smart phone connection is nice for some applications but it's also really nice to not have to bother with opening, syncing, connecting, etc. Just turn them on and it's magically working.. throughout the entire house and beyond.

Anything I don't like about the Smoke X?

So far, I have not found anything to complain about.. it's well though out and that just means the manufacturer really did their homework to find out what people liked and did not like about other multi-channel meat thermometers and then used that information to create something amazing.

How to Purchase

Go to https://thermoworks.com/smokex now to purchase one of these. If you want an extra Smoke X receiver or if you want to pick up the Billows fan controller while you're there, you can do that to.

Get Jeff’s Products!

Leave a Reply to Matt Cancel reply

Your email address will not be published. Required fields are marked *

5 Comments

  1. I purchased the X2. Product worked fine for a while then the receiver stopped syncing with the main unit. Customer service replaced the receiver only and it worked fine for a while (this also pushed the main unit beyond the warranty date), but then it stopped working again. Customer service was no help after that. Recommend buying a different brand.

  2. I would have jumped on this if it didn’t add an extra gadget I’m willing to have a transmitter to send the probe telemetry, but I want it wifi-enabled to an app on my phone (see Meater.)

    I have issues with the Meater (thickness of the probe, limited distance on the base model) but the fact I can use my phone as the receiver is the gamechanger. If you combined that functionality with the credibility of ThermoWorks (I still use my Thermapen for verification), I’d buy the X4 in a heartbeat.

    1. Scott, Thermoworks has a product called “Signals” that is wifi enabled and accepts 4 probes. My favorite multi-probe thermometer has always been the “Smoke” but I find myself using “Signals” more and more lately due to it’s wifi capability and I can watch my temperatures on my phone even if I am away from my smoker for hours. Check out my review writeup at the link below:

      Signals Thermometer Review

  3. Thanks for the great review. I ordered a Smoke X and a Billow, along with a Case and am ready to smoke a brisket this weekend.

  4. Thanks for the nice review. Been wanting an upgraded set but “ol faithful” has been good to me. Well, that is up until half way through my brisket today. Guess I’m in the market for an X4.