It occurred to me a while back that every time we do a pork butt, it's always pulled and while that's an amazing way to serve smoked pork butt, it's equally good sliced. In this recipe, we are going to smoke a pork butt until it's just starting to get tender and then we'll slice it up and make some of the best sliders you ever ate. While we're at it, I'll show you my campfire sauce recipe (don't tell anyone that it's just mayo and your favorite barbecue sauce).
- Prep Time: 15 minutes
- Cook Time: 8 hours
- Smoker Temp: 250°F
- Meat Finish Temp: 175°F
- Recommended Wood: Cherry + Apple
- 6-9 lb pork butt, boneless (also called Boston butt)
- Yellow mustard
- Jeff's original rub recipe (Purchase formula here | Purchase bottled rub)
- Slider buns (I use Hawaiian sweet rolls)
- ½ stick butter, softened
- Jeff's campfire sauce (recipe below)
- Slaw, colorful slaw is best but your favorite will work just fine
- Electric slicer or very sharp knife
I recommend purchasing a boneless pork butt however, if you get home with a bone-in pork butt like I did, you can remove the bone. I'm not the right person to teach “butchering” but as long as you have a sharp knife, you can follow the shape of the bone and keep working at it until it is separated from the meat. Watch your fingers!
I guess the other option is to cook it with the bone intact and then remove it once the meat is cooked however, since we are not cooking this pork butt as long as we normally would for pulled pork, I am not sure how easily it will come out after the meat is cooked + it will be very, very hot!
Here is my pork butt, bone removed
Now since we are planning to slice this thing, I want it to have a nice round shape and this will require a little string around it to hold everything in place.
I cut five pieces about 2-feet long and one piece about 3-feet long.
The shorter pieces I wrapped around the pork butt one by one, cinching it tight and tying a simple square knot to secure it. I did these about every two inches or so along the length of the roast. To get them even just tie one on each end, one in the middle and then one on each side of the middle halfway between middle and the end strings.
I then tied the long string from end to end across all of the other strings.
A little mustard all over to help the rub to stick is just what the doctor ordered
And of course, a good thick coat of Jeff's original rub*. This is a big hunk of meat and it can handle a lot of flavor as long as there's not a lot of salt. Fortunately, my original rub recipe is very low in salt.
At this point I usually leave it sitting while I go get the smoker ready however, this one is going in the fridge overnight so we can cook it the next morning.
Here's a look at what happens in about 20 minutes.
As you can see, the little bit of salt in my original rub* pulls moisture to the surface and that wets the rub and makes it look darker.
The next morning, the pork is ready for the smoker after it's long night in the ice box.
Set up the smoker for cooking at about 250°F using indirect heat and if you smoker has a water pan, fill it up. If you are using a gas, charcoal, or electric smoker, you need to have enough smoking wood to last about 4 hours. I used an equal mix of apple and cherry but you can use whatever smoking wood you have available.
Once the smoker is ready, place the pork butt on the smoker grate. I used a bradley rack sitting on a baking sheet lined with foil to control the mess a little better but you certainly can just place it right on the grate if you want to. If you have multiple racks, you can place a pan below the pork butt to catch the juices that drip down if you want to.
About 3 hours in, the pork butt is looking good.
I'm expecting this roast to take 7-8 hours but ultimately, it's not done until it measures 175°F in the thickest part as measured by my handy dandy Smoke thermometer made by ThermoWorks. I like to use that for long cooks since I can place the receiver in my pocket and no matter where I am around the house, I know the temperature of the smoker and the meat. I didn't need to go anywhere while I was cooking this but if I had, I would have connected the Smoke Gateway which connects the Smoke to my home wifi signal and then I can get see the temperature of my pit and meat while I am at the store or out running errands. It auto connects after the initial setup so it's really easy to use.
To speed things up you can wrap with foil once it reaches about 160°F but I wanted really good bark and for that, it's best to leave it unwrapped the entire time.
Once the meat reaches 175°F, remove it from the smoker and set the pan on the counter for about an hour to rest and cool down.
Based on experience, if I try to slice that roast right now, even if it's cooled down significantly, it will fall apart and the slices will not look good. I recommend placing the roast in the fridge for at least 4-6 hours and overnight is best. I opted for overnight.
The next morning with my Chef's Choice 609 slicer all set up and ready to go, I removed the smoked pork roast from the fridge and cut off about a 4 inch piece for slicing. The smaller chunk will be easier to work with on the slicer.
This is the slicer that I use. It is a Chef's Choice 609 that I picked up for less than $100 and it does a great job considering I only use a slicer about twice a year.
Slicing up some pork roast at about 1/8 thick.
If you do not have a slicer, that's ok. Just get a sharp knife and you can slice the pork roast up that way and it will work just fine.
To make the sliders, I'm gonna need to get a few things ready like toasting the buns, warming the meat and making the campfire sauce.
I recommend placing the meat you plan to use in a foil pan with foil over the top and putting it in a 250-275 °F oven for about 15 minutes. This gives you time to make the campfire sauce and get the buns ready to toast.
Make the Campfire Sauce
I hope you were not planning on that being too difficult or a lot of ingredients. It's super easy and super good.. just the way I like it. Mix the two ingredients together until the color is consistent and set aside.
Toast the Buns
With the soft butter in hand, spread a thin layer onto the top and bottom of each bun and place on a baking sheet.
Turn the oven on broil and insert the buns to toast.
Watch them carefully so they reach a perfect golden brown and don't burn.
Meat is warm, let's make some sliders!
Place the toasted bun bottoms on a plate and start by adding campfire sauce on the bottom..
Add some slaw.
Here's the slaw recipe I used or you can just use your own favorite slaw recipe and the more colorful, the better. You can also use spinach greens or lettuce and a slice of tomato.
More campfire sauce–
Top it with a toasted top bun and it's ready to serve immediately!
- This would also make a great sandwich using normal sized buns if you are so inclined.
- Add some hot sauce to the campfire sauce to light it up.
- Brush melted butter on the very top of the buns after assembling to make them look and taste even better.
- Is there something that you do different or would add to these to make them better? Let everyone know in the comments below.
***Note: you get the Texas style rub recipe free with your order!
If I could give these recipes away, I would do that. I really want you to have them! But, then, this is how I support the newsletter, the website and all of the other stuff that we do here to promote the art of smoking meat.
Read these recent testimonies:
I recently purchased both recipes. The files did not come thru right but Jeff was prompt to get it fixed. I tried them both last weekend and they were a huge hit. I followed his burnt ends recipe to the letter and my neighbors thought I was some master chef! Thanks Jeff! -Susan T.
Thank you for the great advice. Followed your rib recipe and everyone loved them. Used your rub and sauce. On point! -Charles W.
Love the sauce and rub recipes. So far I have used them on beef ribs, pork ribs, and different chicken parts. Can't wait to do a beef brisket. Texas rub is great as well! -Peter S.
Love the original rib rub and sauce! We have an annual rib fest competition at the lake every 4th of July. I will say we have won a great percent of the time over the past 15 years so we are not novices by any means. However, we didn't win last year and had to step up our game! We used Jeff's rub and sauce (sauce on the side) and it was a landslide win for us this year! Thanks Jeff for the great recipes. I'm looking forward to trying the Texas style rub in the near future! -Michelle M.
I tried the rub on a beef brisket and some beef ribs the other day and our entire family enjoyed it tremendously. I also made a batch of the barbeque sauce that we used on the brisket as well as some chicken. We all agreed it was the best sauce we have had in a while. -Darwyn B.
You see the raving testimonies and you wonder, “Can the recipes really be that good?”
No worries! Make up a batch and if it's not as good as you've heard.. simply ask for a refund. Now that's a bargain and you know it. Let's review:
- You decide you don't like the recipes.. you don't pay!
- The recipes are absolutely amazing!
- Once you order, there'll be no more recipe ads in the email version of the newsletter
Well.. what are you waiting for.. click on the big orange button below to order the recipes now.
With more than 900 reviews on Amazon.com and a rating of 4.7 out of 5 stars, it comes highly recommended.
It is a Bestseller in Barbecueing & Grilling books on Amazon.
If you enjoy the newsletter and would like to do something helpful, then..
The next time you decide to order something at Amazon.com, use THIS LINK to get there and we'll get a small commission off of what you purchase.
Thank you in advance for using our special link: http://www.smoking-meat.com/amazon
Sliced Pork Butt Sliders with Campfire Sauce
- 6-9 lb pork butt , boneless (also called Boston butt)
- Yellow mustard
- Jeff's original rub recipe (purchase recipes here)
- Slider buns (I use Hawaiian sweet rolls)
- ½ stick butter , softened
- Jeff's campfire sauce (recipe below)
- Slaw , colorful slaw is best but your favorite will work just fine
Step 1: Prepare Pork Butt
- I recommend a boneless pork butt. If you purchase a bone-in, you will need to remove the bone with a sharp knife prior to cooking.
- To create a nice round shape for slicing, tie the pork butt up along the length and from end to end.
- Add a thin coat of mustard all over and then apply a heavy coat of Jeff's original rub. The pork butt is ready to smoke or it can be placed in the fridge overnight.
Step 2: Smoke Time
- Set up the smoker for cooking at about 250°F using indirect heat and if you smoker has a water pan, fill it up. If you are using a gas, charcoal, or electric smoker, you need to have enough smoking wood to last about 4 hours. I used an equal mix of apple and cherry but you can use whatever smoking wood you have available. Once the smoker is ready, place the pork butt on the smoker grate.
- Once the meat reaches 175°F (about 8 hours), remove it from the smoker and set the pan on the counter for about an hour to rest and cool down.
Step 3: Cool and Slice
- Let the roast cool for about an hour then place it in the fridge for about 5-6 hours or overnight to firm up for slicing.
- Slice the smoked pork butt with an electric slicer or a very sharp knife into pieces that are about 1/8 inch thick.
Step 4: Prepare the Slider Components
- Make the campfire sauce using 1 cup of Jeff's barbecue sauce and 1 cup of mayonnaise. Mix thoroughly.
- Spread a thin layer of softened butter onto the tops and bottoms of each slider bun and toast under the broiler until golden brown. Watch carefully and do not burn.
- Warm the sliced meat in a 275°F oven covered with foil for about 15 minutes.
Step 5: Assemble the Sliders
- Place a dollop of campfire sauce on the bottom, stack 3-4 layers of meat on top of that, a spoonful of slaw, more campfire sauce on top with a toasted bun.
- Serve immediately!