As meat smokers we are all about patience– low and slow is our motto and we believe that the flavor and texture of things like smoked pork butt are greatly enhanced by cooking it slowly in a low heat environment with plenty of smoke kissing the meat as it goes through it's metamorphosis. But is there really anything wrong with speeding things up once in a while when you are pushed for time or for those days when you just need some sleep AND smoked pulled pork?

Pork butt (Boston butt, pork shoulder) normally takes 12-14 hours to turn it into tender, juicy pulled pork. In this tutorial, I will show you how to get that done in only 5 hours. Let's get after it!

Helpful Information
  • Prep Time: 10 minutes
  • Cook Time: 5 hours
  • Smoker Temp: 300°F
  • Meat Finish Temp: 205°F
  • Recommended Wood: Pecan
What You'll Need
Please note that my rubs and barbecue sauce are now available in 2 formats-- you can purchase the formulas and make them yourself OR you can buy them already made, in a bottle, ready to use.

About Fast Smoking Pork Butts

If you thought this would be something really complex, you would be wrong. This is extremely easy and only requires you to turn up the heat about 75 degrees higher than normal and if you're not used to wrapping, you'll want to wrap the pork butt at about 165°F or once it reaches the perfect color.

As a disclaimer, I have not done an actual side by side test with a regular low and slow pork butt and something in me naturally believes that slower must be better but life is all about sacrifices and when you need to get it done fast, I really think this will more than fit the bill. Truth be told, if you blindfolded me, I may not be able to tell the difference between a pork butt that's cooked slow and one that's cooked fast. I'll let you decide if you can really tell the difference and I'd love to hear your opinion on it once you've tried it.

Step 1: Mustard and Rub

Set the pork butt on the counter.

A little mustard to help the rub to stick

Rub it all over the top and sides. You don't have to worry about the bottom (fat cap)

Add about ¼ cup of Jeff's original rub* to the top of the pork butt and massage it into the top and sides of the pork butt. It will mix with the mustard and become a beautiful sticky paste.

*Purchase formula here | Purchase bottled rub

If you are doing this the night before (highly recommend this), then set it down in a covered container or wrap it in plastic wrap and place it in the fridge.

Otherwise, leave it sitting while you go get the smoker ready.

Step 2: Get the Smoker Ready

ANY smoker will work for this as long as you can cook at temperatures of around 300°F or as close to that as you can get. I opted to use the Pit Barrel Cooker (PBC) for this since it already tends to cook a little hotter than most smokers. I had to crack the lid just a little to increase the heat from it's normal 275°F up to 300°F.

You can check out my PBC review to learn more about this cooker and see how to set up the charcoal for cooking.

This cooker is designed so you can hang the meat from bars but it also has a cooking grate which sits a couple of feet above the coals and that's what I used for this pork butt.

Set up your smoker for cooking at about 300°F using indirect heat. If your smoker uses a water pan, it's a great idea to fill it up. Let the smoker preheat and once it's up to temperature, you're ready to cook.

Step 3: Smoke Cook the Pork Butt

Place the pork butt on the smoker grate fat side down.

Many people cook pork butts fat side up and this is ok but in my opinion, there's a couple of good reasons for cooking butts fat side down:

  1. There is plenty of fat on the inside of the meat, you really don't need the fat cap on top to keep the meat moist. I like to have it on the bottom to protect the meat from any radiant heat that might be present.
  2. When the meat is done cooking, the bottom portion often sticks to the grate– I'd rather the fat cap be the part that sticks rather than the nice meat on the other side.

If you've had good results cooking them fat side up then feel free to continue with what works best for you.

Close the lid or door and let the meat cook for about three hours. Keep a good eye on the temperature and the color of the meat. You want it to get some good smoke but if it starts getting too dark after 2 hours, it's ok to go ahead and proceed to the next step.

dOn the one I cooked for this newsletter, I allowed it to reach 165°F which took right at 3 hours.

Be sure to use a high quality thermometer like the ThermoWorks Smoke to monitor the temperature of the meat and even the pit while it cooks.

To preserve the color and to help it to tenderize at its maximum potential, I recommend wrapping it in foil at this point.

I used a double layer of foil and then set the whole package down in a foil pan to make sure there were no leaks.

Let the wrapped pork butt continue cooking at 300°F until it reaches approximately 205°F. After many, many pork butts, I can tell you that somewhere between 205°F and 207°F is about as perfect as you can get. The meat is tender, much of the fat is rendered and that's exactly what you want.

When it's finished, remove it from the heat.

Step 4: Rest and Pull

You'll want to let the meat rest and cool down a little before attempting to pull it into pieces. I often let it sit for an hour or two before pulling it and this is just fine. If you are in a hurry, get some good gloves to protect your hands from the heat and go ahead and pull it after it rests for about 30 minutes.

Here's a closeup image to show you the great smoke ring that was achieved in the pit barrel cooker.

Idea: Make Sliders

I had some nice rolls from my local grocery store and made a few sliders to try the smoked pulled pork. They were amazing!

Just meat, slaw, a few pepperoncinis and some of my barbecue sauce* and it was an instant success.

*Purchase formula here | Purchase bottled sauce

Please note that my rubs and barbecue sauce are now available in 2 formats-- you can purchase the formulas and make them yourself OR you can buy them already made, in a bottle, ready to use.

Purchase the Formulas for Jeff's Rub and Sauce
**Instant Download!**
Jeff's Original Rub Recipe
Jeff's Barbecue Sauce

***Note: you get the Texas style rub recipe free with your order!

If I could give these recipes away, I would do that. I really want you to have them! But, then, this is how I support the newsletter, the website and all of the other stuff that we do here to promote the art of smoking meat.

Read these recent testimonies:

I recently purchased both recipes. The files did not come thru right but Jeff was prompt to get it fixed. I tried them both last weekend and they were a huge hit. I followed his burnt ends recipe to the letter and my neighbors thought I was some master chef! Thanks Jeff!  -Susan T.
Your Content Goes Here
Thank you for the great advice. Followed your rib recipe and everyone loved them. Used your rub and sauce. On point!  -Charles W.
Love the sauce and rub recipes. So far I have used them on beef ribs, pork ribs, and different chicken parts. Can't wait to do a beef brisket. Texas rub is great as well!  -Peter S.
Love the original rib rub and sauce! We have an annual rib fest competition at the lake every 4th of July. I will say we have won a great percent of the time over the past 15 years so we are not novices by any means. However, we didn't win last year and had to step up our game! We used Jeff's rub and sauce (sauce on the side) and it was a landslide win for us this year! Thanks Jeff for the great recipes. I'm looking forward to trying the Texas style rub in the near future!  -Michelle M.
I tried the rub on a beef brisket and some beef ribs the other day and our entire family enjoyed it tremendously. I also made a batch of the barbeque sauce that we used on the brisket as well as some chicken. We all agreed it was the best sauce we have had in a while.  -Darwyn B.

You see the raving testimonies and you wonder, “Can the recipes really be that good?”

No worries! Make up a batch and if it's not as good as you've heard.. simply ask for a refund. Now that's a bargain and you know it. Let's review:

  • You decide you don't like the recipes.. you don't pay!
  • The recipes are absolutely amazing!
  • Once you order, there'll be no more recipe ads in the email version of the newsletter

Well.. what are you waiting for.. click on the big orange button below to order the recipes now.

Order Jeff's Rub Recipe n' Sauce Recipe
I really, really appreciate the support from my newsletter friends and be sure to let me know if you have any questions about this.
Jeff's Smoking Meat Book

The book is full of recipes and contains tons of helpful information as well. Some have even said that “no smoker should be without this book”!

With more than 900 reviews on and a rating of 4.7 out of 5 stars, it comes highly recommended.

It is a Bestseller in Barbecueing & Grilling books on Amazon.

Thin Blue Foods Store | AmazonBarnes & Noble | German Edition

Digital versions available via Nook | iTunes | Kindle

Get Almost Anything at Amazon

If you enjoy the newsletter and would like to do something helpful, then..

The next time you decide to order something at, use THIS LINK to get there and we'll get a small commission off of what you purchase.

Thank you in advance for using our special link:

Printable Recipe

Print Recipe
4.59 from 12 votes

Five Hour Smoked Pork Butt

Prep Time10 mins
Cook Time5 hrs
Total Time5 hrs 10 mins
Course: Entree
Cuisine: Barbecue


  • 1 Each Pork Butt 5 to 8 lbs is normal
  • 2 to 3 Tbsp Yellow mustard
  • 1/4 Cup Jeff's original rub


  • Apply yellow mustard all over the outside of the meat to help the rub to stick better.
  • Pour ¼ cup of Jeff's original rub on top of the pork butt and massage it in to create a paste. Cover the top and sides with the rub/mustard paste.
  • Cover/wrap the pork butt and place it in the fridge overnight if possible
  • Set up smoker for cooking at about 300°F with indirect heat. Once it's ready, it's time to cook.
  • Place pork butt on grate fat side down and close lid/door.
  • When the pork butt reaches 165°F or when the color is perfect (about 3 hours), remove meat from smoker and wrap in a double layer of heavy duty foil.
  • Place pork butt back onto 300 degree smoker and continue to cook for 2 hours or until the internal temperature of the meat reaches 205°F.
  • Remove the meat from the heat and let it rest for at least 30 minutes.
  • Pull the meat into chunks, pieces discarding any clumps of fat that did not render during the cooking process.
  • Serve pork on slider buns with slaw, pickles, Jeff's barbecue sauce, onions, etc.
  • Enjoy!
FREE Smoker Recipes in your Inbox
No big words– just clear instructions and how-to images
Give it a try, single-click unsubscribe at any time if you change your mind.